Home » today » Technology » DDR4 and DDR5 have moved under one roof on the Onda motherboard

DDR4 and DDR5 have moved under one roof on the Onda motherboard

The two-generation LGA1700 socket solution eats up processors up to Core i7 and focuses only on the essentials.

Hirdetés



We have already become accustomed to the fact that from time to time, among the products intended for the domestic market of Chinese motherboard manufacturers, quite interesting hybrid models are born, which bring the services of several generations under one hat. An example is momomo_us detected by microATX Then H610M +which adds an x16 PCI Express 5.0 and an x1 PCI Express 3.0 bus to the Intel H610 control bridge.


[+]

However, the piquancy of the thing is not in the presence of the 5.0 PCI Express interface, but in the two DIMM slots on the board, as we can drive DDR4 modules in one and DDR5 modules in the other. The former is supported up to 3200 effective clock speeds up to 4800 MHz (up to 32 GB), and as with all similar solutions so far, you can only use one at a time, although there is only one channel mode on the menu, which has its own setback.


[+]

Equipped with a bare 8-phase VRM, the 220 x 180 mm newcomer has three SATA ports and an M.2 socket compatible with both PCI Express and SATA interfaces, and although network connectivity is via gigabit Ethernet, the available M.2 Key Thanks to this interface, the retrofitted Wi-Fi / Bluetooth units also received a green light. The board, treated with PECVD technology, is resistant to moisture, dust and corrosion, has an eight-pin EPS connector and two rows of pins for fans.


[+]

On the back is a PS / 2 combo port, an HDMI and a 15-pin D-Sub output, two USB 3.0, plus two USB 2.0 ports on the RJ-45 connector, and of course the three 3.5mm jacks. We are not yet able to provide a purchase price.

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.