A bald motorcycle tire can not only reduce the level of comfort, but also endanger the safety of its users.
Because, the texture of tires that have run out will make the traction become less and less.
So that conditions like this will make the motorbike feel slippery when driving, especially when passing through wet roads.
If your favorite motorcycle tire is like this, it’s a good idea to immediately replace it with a new one.
Also Read: Signs of Motorcycle Tires Must Be Replaced, Recognize Through Their Physical Characteristics
Bald Motorcycle Tires, Why Does This Happen?
Tires are one of the most important components in a vehicle, and motorcycles are no exception.
Why not, because this one component can support the speed of the motor so that it can be safer and more comfortable.
However, one of the things that we often encounter on tires is that the surface has started to be smooth or even bare. Tires that are bald like this will have a negative impact, because it endangers the user.
In addition, usually motorcycle tires in general have been specifically designed to last for 1 and a half to 2 years.
So what are the causes why motorcycle tires can be bald? How to handle it?
Also Read: Causes of Sudden Broken Motorcycle Tires You Must Know
Often Lifting Heavy Weights
One of the reasons why one-sided motorcycle tires are bald is because they often carry various kinds of heavy loads.
Whereas each type of motorcycle tire will have a maximum limit to be able to carry loads.
When it has exceeded the limit that has been determined, it will make the tire pressure to the road surface become stronger.
As a result, the friction between the road and the tires will increase, making it flat or bald quickly.
Rim Lean to One Side
It turns out that the rim that leans to one side can also be one of the reasons why the motorcycle tires wear out quickly.
Because the application on two-wheeled vehicle rims, especially automatic, usually has a crossbar design leaning to the right.
So that things like this can put pressure only on the right side. So conditions like this will make the right side of the motorcycle tire bald.
Also Read: The Best and Quality Motorcycle Tires for Various Activities
What’s the solution?
As a motorcycle owner, you can check the condition of the bearings or bearings on the front tire drum. The trick is to lift or raise the front tire of the motorcycle with the middle standard motor position.
After the tire is lifted, then just shake the tire left and right, if it feels oblique, it means the bearing is damaged.
This makes the wheel rotation become unbalanced and makes the rubber tires to be eroded side by side.
Don’t forget to check the front disc rotation whether it’s still smooth or dragging. Also check whether the disc is rotating crooked or center.
If a bald motorcycle tire occurs on your vehicle, then you should immediately replace it with a new one. This is for your safety and security while driving. (R10/HR-Online)
–
