How to change CVT axle oil at home
Can be done on all types of motorbikes, but make sure the keys used are appropriate.
1. Prepare the necessary tools
First, you must prepare a 12 mm wrench (adjust), pliers, a rag, 150 ml axle oil (adjust), and a tank or container for used axle oil collection.
2. Unscrew the CVT axle oil tab
—
Okay, if all the tools have been prepared, the next step is to open the transmission oil tab bolt with the shock key 12 earlier. Don’t forget to prepare a container to hold used oil.
3. Ideal position
—
In order for the oil to come out quickly, you can position the motor in a tilted state. Use the standard side center combination. Wait and make sure the axle oil comes out completely. While waiting, you can clean the oil drain bolt with a clean cloth.
4. Open the CVT axle oil cover
—
If the oil is no longer dripping, replace the oil drain bolt earlier. Then, open the axle oil cap using pliers.
5. New oil pouring process
—
Pour axle or transmission oil according to the manufacturer’s recommendations. To find out the exact dose you can look in the manual of each motorcycle.
6. The last step
—
After you finish pouring the oil, you can clean the oil cap with a clean cloth, then install it precisely and screw it back in.
– .
