IStock-Joachim Berschauer
–
Illustration of LPG gas.
–
IDEAOnline-Gas elpiji (LPG) so worthy use will bring danger. Check the eligibility carefully when buying.
Here are some tips to consider when buying gas cylinders and accessories.
Check the condition of the tube at least 80% of the tube surface LPG still covered in paint.
A little rust is still allowed, as long as it’s not too deep.
1. Karat
Tubes with corroded bottoms should be avoided as they are more critical to leakage.
Also Read: Just apply this one kitchen spice while washing, oil stains on clothes disappear overnight
2. Use time
Expiration of the service life (expiration) of gas cylinders.
Writing expired in the form of “alpha code”.
For example, if the code “A09” is written on the gas cylinder, it means that the service life of the cylinder ends January-March 2009.
(Code “A” means January–March, “B” = April–June, “C” = July–September, “D” = October–December)
Jiji
–
Elements needed in the use of LPG gas.
–
3. The weight of the tube must be right.
Too heavy or too light the impact is equally detrimental.
4. Segel
Also Read: Just apply this one kitchen spice while washing, oil stains on clothes disappear overnight
Also Read: Smoke Sensor for Fire Anticipation, Where to Place it?
The seal must not be torn.
The part that covers the valve tube must not be torn or appear to have been tampered with.
5. Connection
In addition to the weld connection between the top and bottom and the connection with the legs and upper handle, there must be no other welding marks in the tube.
6. The Threaded Tube and Valve Drain are Good
Threaded type valves can be found on 5.5 kg and 2.65 kg LPG cylinders.
The 12 kg tube is equipped with a clamp groove type valve. The threaded type is safer against leakage from inside the tube, but is more complicated to install the regulator.
The clamp groove type is the opposite, it is easy to install the regulator, but the regulator can still rotate even though the clamp is locked.
Productnation
–
Illustration of LPG gas cylinder (LPG).
–
7. Don’t be persuaded
Also Read: Just apply this one kitchen spice while washing, oil stains on clothes disappear overnight
Also Read: Fire Due to Leaking Gas Cylinder, Do These 4 Things To Avoid Exploding!
Do not be tempted by the salesperson’s persuasion, usually offering a product that seems good.
Investigate the truth!
8. SNI logo
Choose gas cylinders and their accessories only with the SNI logo.
Usually in the packaging of a good regulator and hose product there is a glossy white sticker accompanied by an SNI Product User Certificate number (SPPTD).
The National Standardization Agency (BSN) has established the Indonesian National Standard (SNI) for several related products.
Rubber hose for LPG gas stove SNI
06-7213-2006, SNI 1452:2007 steel tube valve, SNI 1591:2007 LPG steel tube valve, regulator
low pressure for LPG steel tube SNI 7369:2007, single burner LPG fuel gas stove with mechanical ignition system SNI 7368:2007.
–
Illustration of LPG gas hose.
–
Also Read: So Avoiding E.Coli Bacteria, Revealed The Reason Why We Should Apply Baking Soda on Drinking Bottles
Also Read: Putting Stuff on the Fridge Makes It Wasteful and Triggers Fires, How come?
There are 2 types of gas cylinder hoses LPG circulating in the market, namely made of rubber and stainless steel.
Rubber hose is indeed elastic, but over time its elasticity will decrease and harden, then crack.
Because the cracks are smooth, the gas that comes out is not detectable by our smell.
It’s just that the gas that comes out continuously, causing the gas to run out quickly.
Stainless steel hose, the inside is made of rubber and coated with stainless steel. This type is relatively more safe from mouse bites.
However, if there is damage inside, it will not be visible.
To anticipate more severe damage, check the hose frequently.
#Rumahminimalis #Berbagiidea #Sharing the story #Canfromhome #Gridnetwork #Rumahtropis
PROMOTED CONTENT
– Featured Videos
LPG gas is suitable for use