Gas motor choked? Immediately find out the cause to get a solution. Currently the existence of a motorcycle is certainly not a foreign thing.
Considering everyone’s need for transportation, a motorbike is the right choice. Besides being easy to use, the maintenance you can do is quite cost-effective.
That’s why almost everyone has a motorcycle as a means of transportation. Unfortunately, there are still many people who are not careful in carrying out the treatment.
Though motor maintenance must be done regularly. This helps the components function properly. If you don’t do the treatment infrequently, there’s a good chance that problems can occur.
One of the things that often happens is the gas motor chokes. Whereas the main thing to do when driving is to pull the gas handle. But when there is a problem with the vehicle components there is instability.
Usually the motor stalls as if it will break down. If this happens, the level of driving comfort will decrease. Especially for those of you who use injection technology motors.
It’s best to find out what could be causing this problem to occur. So that treatment will be faster and not cause more severe damage.
Baca Juga : Perawatan Motor Klasik Sekelas BMW Tidak Sulit, Asal Tahu Kuncinya
Usually if one problem arises, it can spread to cause new problems. So that it doesn’t happen to you, the solution is to always check and provide regular maintenance.
The Cause of Staggered Injection-Tech Motorcycle Gas
Having a motorcycle, of course, must also provide proper maintenance. In fact, you also have to know about the components and functions of the vehicle.
This is so that you can check each component. Moreover, there are many types of problems that can occur in the use of motorcycles.
Starting from minor and severe damage. Staggering motors are one of the problems that often occur, including injection-tech motorcycles.
If a problem like this occurs, it will certainly reduce the level of comfort when driving. The following are some of the causes of a choked motor gas that you need to know.
Baca Juga : Ciri-ciri Radiator Motor Rusak, Efek Buruk dan Cara Perawatannya
Invalid Valve Settings
One of the causes of the gas motor choking is on the valve setting. The compression pressure in the fuel chamber will be affected by the valve and valve settings.
If the setting is too tight it will cause the valve to open quickly. Because the opening is too long will result in more gas entering. It’s different if the suit is too loose.
The valve will open late and close quickly. Especially if this happens to the intake valve.
This problem will make the intake of the fuel and air mixture take place quickly. This results in a small amount of the mixture.
Air Filter Not Working
There are many reasons why the engine gas injection technology falters. An air filter that does not work can cause the vehicle to suddenly break down.
Given the important function of the filter or air filter, this problem can occur. The filter serves to filter the air that enters the fuel chamber.
Baca Juga : Speedometer Sepeda Motor Macet, Penyebab dan Cara Memperbaikinya
The filter functions so that the fuel does not mix with dirt or dust particles. When the condition is dirty, it makes the gas pull choke. This results in unstable and heavy when pulled.
Reduced Fuel Pressure
Every motorcycle with injection technology usually has a fuel pump or fuel pump. This pressure can be measured using a tool called a fuel pressure gauge.
The size of the pressure is in accordance with the type of each vehicle. If the pressure is less than standard it can be the cause of the problem of stuttering gas motor pull.
Incorrect spark plug gap
Spark plugs are an important component in motorcycle vehicles. If the distance is not right, it can be the cause of the gas motor choking. So it is less stable and can make the user uncomfortable.
If the spark plug has the proper clearance, it will function and work properly. The size of the gap in this component can affect the ignition temperature of the spark plug so that the motor gas stagnates.
If the spark plug has a large gap, the ignition will also be large. The machine will work more perfectly. It’s different if the installation is not right.
This will actually cause the insulator to crack. Even tightening the spark plug too hard can also cause the thread to break. In order to avoid choking of the motor gas, you must check the condition of the spark plug gap. (R10/HR-Online/Editor-Eva)
–
