The van belt or v-belt is an important component of an automatic motorbike. Van belt includes components that you should replace regularly. Because over time, the condition of this automatic motorbike component will get worse and eventually be damaged.
The V-belt is a component on an automatic motorbike that you can’t find on gear motors. Because the gear motor does not use these components, but uses a chain. The automatic motor V-belt itself has the same function as the chain on the gear motor.
Read Also: How to Change the Sound of the Motor Matic Exhaust to Make it Louder
That way, it means that the automatic motorbike v-belt functions to move the motorcycle. Its job is to continue the rotation from the front pulley to the rear pulley. Without it, an automatic motorbike will not be able to run, so we cannot use it to drive.
The Van Belt Motor Matic is Damaged and Must Be Replaced, Here Are the Signs
Because of the important role of the v-belt motor, of course this component can affect the performance of the motor. V-belts that are in good condition are certainly capable of producing good motor performance as well. Conversely, if the conditions are not good, then the motor performance is also not optimal.
So, along with the use of motorbikes, the condition of the v-belt can also decrease and be damaged. The poor condition of the v-belt can of course have a bad impact if you continue. The impact is like breaking a v-belt when you’re riding a motorcycle.
This is of course very annoying and can even threaten the safety of you and other road users. When the v-belt breaks, you won’t be able to use the motorbike. Finally the trip gets interrupted and you have to replace the v-belt first.
To prevent the van belt from breaking, there are several ways you can do it. You do this by routinely checking the condition of the v-belt whether it is still good or not. There are several signs that indicate it’s time to replace the v-belt. Here are the signs:
V-belt wire is rusted
The first sign that it’s time to replace the v-belt is that the wire on the v-belt is rusty. If you don’t replace it, the risk of breaking the wire will be even greater. If the wire is rusty but the rubber is still pretty good, then you still need to replace it.
The V-belt Has Started Cracking
The condition of the rubber v-belt that starts to crack also indicates you need to replace it. A cracked V-belt is certainly dangerous because it can increase the risk of breaking. If the v-belt breaks while you are driving, of course it can endanger safety.
Read Also: How to Increase Automatic Motor Acceleration to Make it Faster
Because, you will find it difficult to control the balance of the motorbike and make the motorbike crash. When the van belt breaks, you won’t even be able to advance or reverse the motorbike. This is of course very inconvenient so we should avoid it as much as possible.
Loose V-belt
The next sign is a loose v-belt which indicates that performance has decreased. A loose V-belt will look saggy and easy for you to slide on. These conditions make the transfer of power between the drive shaft and the load inefficient.
Noise Appears
Noise on an automatic motorbike can indeed occur due to several causes. One of them is because the v-belt begins to weaken and rub against other components. This friction can cause a crackling or whirring sound.
Changing the Shape of the Van Belt
A sign of the time to replace the next v-belt when the v-belt has changed in size. Either it shrinks or stretches due to hot conditions due to friction between components. If the v-belt size is not normal, then you must replace it immediately.
Rigid and Rough Motor Pull
A normal automatic motorbike should have a smooth and smooth pull. However, if the pull feels stiff and rough it means there is a problem such as a v-belt that is in bad condition. You can immediately confirm the condition of the v-belt and then replace it if it is damaged.
Vibration Appears
The v-belt mark must be replaced as soon as you can identify it, namely vibration. Vibrations will appear when you accelerate and indicate the v-belt has lost traction. However, the vibration due to the v-belt can also disappear after a while.
Read Also: Causes of Motor Matic Not Strong Rising and How to Overcome Them
Those are some of the signs or characteristics of the automatic van belt that you should replace. If your motorcycle v-belt has the mark above, then replace it with a new one immediately. The goal is to prevent the v-belt from breaking and breaking in the middle of the road while driving. (R10/HR-Online)
2023-07-22 07:59:52
#Van #Belt #Motor #Matic #Replaced #Immediately #Signs
