RAZER Tomahawk Mini-ITX Gaming Case
▲ RAZER Tomahawk Mini-ITX Gaming Case
The RAZER “TOMAHAWK MINI-ITX” is sent for testing this time. As the name implies, it is a motherboard that supports ITX specifications. The appearance is mainly simple and windy. It is equipped with double-sided tempered glass hinged door panels, supports water cooling system, and is equipped with dustproof. Net design, equipped with RGB light-emitting module at the bottom, supporting its own Razer Chroma RGB lighting effect synchronization technology, with 16.8 million colors and a series of effects to choose from. The price is HKD$1,759, which is similar to the price of the previous multiply chassis , But the RAZER faith theme is priceless!
▲ 3mm full-frame tempered glass on both sides
RAZER “TOMAHAWK MINI-ITX” attached to the double-sided 3mm full-frame tempered glass hinged door, uses a magnetic design, so the side panels can be opened without screws. In order to enhance the strength of the glass panel corners, a metal reinforced frame structure is added instead of the There are holes in the glass, so that the force point is absorbed and absorbed by the metal frame, reducing the risk of chipping at the corners. The opening and closing method of the non-drilled glass side plate is the same as the general side plate. The tool-free assembly and disassembly design makes it easier for players to assemble , The front version is equipped with a simple dense surface with a green Razer Logo, and a ventilation mesh design is added to both sides of the panel and the top cover to effectively improve the heat dissipation effect of the chassis.
▲ Support RAZER CHROME RGB lighting effect
As a member of RAZER gaming products, how can there be no ARB lighting effect? The factory adds ARGB ambient lights on both sides of the bottom of the chassis to support RAZER CHROME RGB lighting effect control. Users can select different lighting effects through the RAZER software, or Synchronize with other RAZER products.
▲ USB 3.2 Gen 1 Type A + USB 3.2 Gen 2 Type-C
The I/O Panel is located at the top front, providing Power switch button, Reset button, 3.5mm high-definition audio interface, 2 sets of USB 3.2 Gen 1 Type A ports, and 1 latest USB 3.2 Gen 2 Type C interface. Meet the needs of today’s PC users.
Support Mini-ITX / Mini-DTX, up to 32cm VGA
▲ Support Mini-ITX / Mini-DTX motherboard
Razer “TOMAHAWK MINI-ITX” uses SPCC cold-rolled steel plate with dimensions of 206.2mm x 321.5mm x 367.2mm. It supports Mini-ITX and Mini-DTX Form Factor motherboards. After installing the power supply bracket to the front panel, The ability to support a motherboard up to 244x226mm means that a narrower mATX specification motherboard may also be installed in the chassis. However, if you want to use the Razer Chroma software to play lighting effects, it is better to choose a high-end ITX motherboard.
▲ Supports up to 32cm graphics card
The CPU position can support a heat sink with a height of 16.5cm, and a graphics card with a length of 32cm can be installed. The 3-Slot slot can support a three-slot graphics card to cope with the latest AMD RX 6800 series and NVIDIA RTX 30 series. Unfortunately, the graphics card can only be installed horizontally, and the vertical installation method is not supported.
▲ Support SFX / SFX-L power supply
The RAZER “TOMAHAWK MINI-ITX” chassis moves the power supply to the center of the front, and supports SFX and SFX-L size power supplies. The power supply bracket is a fixed and non-foldable design, so the power supply installation position cannot be adjusted.
Support 3 sets of 2.5-inch SSD/HDD
▲ The deepest cable management layer is 32mm
Although it is a Mini-ITX box, the RAZER Tomahawk Mini-ITX cable management layer is 32mm deep, but since the right side panel is also full-frame tempered glass, it is necessary to keep the wires in the chassis neat and tidy.
▲ Support 3 2.5-inch SSD/HDD storage devices
Although the space of Razer “TOMAHAWK MINI-ITX” is not small, the storage space has completely abandoned 3.5″ support! The chassis only supports three 2.5″ devices. I appreciate this. Currently ITX motherboards support M.2 interface. , Players can purchase a large-capacity M.2 SSD to replace SATA devices, which can also reduce the difficulty of cable management.
Support RAZER Synapse 3 package
The RAZER Tomahawk Mini-ITX chassis supports ARGB lighting effect control. Players can freely set their favorite lighting effect mode through the Razer Synapse 3 package. There are a variety of built-in dynamic lighting effects including: click interactive light, flame effect, breathing light, etc., I have to say in “Playing with lights” is better than motherboard manufacturers’ software.
Support up to 2 groups of 240 water cooling
▲ The detachable top can support two 12 cm fans or 240 water cooling
In order to facilitate the assembly of players, the front version and top cover of Razer “TOMAHAWK MINI-ITX” adopt an easy-to-disassemble and tool-free assembly and disassembly design, allowing users to disassemble each part first, and then install the fan or cold exhaust. Put it back to avoid the hardship of screwing in the narrow case.
▲ 12 cm fans can be installed in the front and rear
The Razer “TOMAHAWK MINI-ITX” supports up to 2 sets of 12cm fans on the top and 240mm water-cooled radiators. The bottom also supports up to 2 sets of 12cm fans and 240mm water-cooled radiators. However, installing a water-cooled radiator on the bottom will affect the performance of the graphics card. Installation location. Both the front and rear of the chassis support 1 set of 12cm fans, but the entire chassis only has a dust filter in the front position, and the chassis is not attached to any fan. Players must purchase a fan when assembling to provide a good heat dissipation environment and avoid the host The hardware is overheated.
RAZER Tomahawk Mini-ITX Gaming Case
Price: HK$1,759
Enquiry: Altech Computer (3628-3377)
Lin Zi comment:
Although Lin Tsai does not advocate using ITX chassis with high-end hardware, it is to some extent related to the limited heat dissipation environment of ITX, but the heat dissipation installation of Razer “TOMAHAWK MINI-ITX” is quite sufficient. The height of the CPU heatsink can support 165mm, which is equivalent to 99 on the market. % Of the radiator can also be installed, you can also install a water-cooled radiator, the graphics card can also support 3-Slot graphics card, the graphics card can be drawn directly from the bottom of the wind cooling, and the power supply can support the SFX-L specification means It is not a dream to build an ITX gaming console with the strongest performance and the heat dissipation environment permits. ITX is very clever to abandon the design of the 3.5″ device, which can save space in the machine in disguise.
In addition, “TOMAHAWK MINI-ITX” is a rare double-sided tempered glass hinged door design. The magnetic design is very convenient to replace screws. The only pity is that “TOMAHAWK MINI-ITX” does not have a pre-installed fan, which makes assembly costs high. , But considering the positioning of “TOMAHAWK MINI-ITX”, players shouldn’t mind.
–
