Home » today » Health » How to Know Motor Axle Oil Runs Out by Recognizing Its Characteristics

How to Know Motor Axle Oil Runs Out by Recognizing Its Characteristics

How to find out the motor axle oil is actually quite easy, but if you are a beginner, it may be quite difficult.

But don’t worry if you can’t do it, because there are a few tricks you can try.

Well, changing the axle oil itself is as important as changing engine oil on this two-wheeled vehicle. Because if the axle oil is changed late, the effect is that the gear ratio can be damaged and the sound becomes rough.

Read Also: How to Check Motor Oil Level by Using the Following Steps!

How to Know Motor Axle Oil Runs Out, Beginners Must Know This!

The axle oil itself has a function, namely to lubricate and smooth the movement of the gear ratio in the automatic motor transmission system.

If you don’t change the axle oil regularly, the movement of the gear ratio will be hampered, which can cause damage to the front pulley.

Worse yet, then you have to replace the automatic motor transmission gear with a new one and the price is quite expensive.

Not only that, but the vehicle’s power will also be a bit restrained because the lubricating power has decreased.

Usually this axle oil change every time it has covered a distance of approximately 8000 km or about once every 8 months. But before replacing it, you can find out what are the characteristics that the axle oil has run out.

Read Also: Causes of Motor Oil Running Out Quickly, 4 Problem Factors That Often Occur

Contaminated Oil

How to find out the motor axle oil runs out is to see how the condition of the oil. If the condition has been contaminated with other fluids, that means you must replace it immediately.

Well, the axle oil itself has a viscosity level of SAE 140 or SAE 90 and as you use it, it will also decrease or become contaminated.

If something like this has happened, it means that your axle oil must be changed immediately because it is no longer suitable for use.

Vibrating Vehicle

When your motorcycle is driving and the engine suddenly vibrates and makes a rough sound. That means that the axle oil on your favorite two-wheeled vehicle must be changed again immediately.

This can happen because the lubrication can no longer run perfectly. So that when you go through certain roads such as descending roads, you can’t avoid the vibration even though you are careful.

Read Also: The characteristics of the Matic Motor running out of oil that you should be aware of!

There is a noisy voice

Because the axle oil that we haven’t changed for a long time, it will cause noise. In addition, the sound that comes out of the automatic motor that you are driving becomes noisy.

This happens because the axle oil that is useful for driving the automatic transmission is already watery or not thick anymore. Don’t let some of the other components on your automatic motor get damaged because you don’t change the axle oil.

If that happens, the cost of repairs and replacements can be many times greater than changing lubricating oil. Therefore, it is important for you to always take care of your vehicle, it is nothing but the oil.

Now, after you know several ways to find out if the motor axle oil runs out with these characteristics, then you must act immediately.

Just replace it with new oil, but if you can’t then you can ask for help from a reliable technician. (R10/HR-Online)

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.