The washing machine during its operation often “jumps”. Some people don’t like it very much. If you are also in this group, then learn ways to easily solve the problem. The walking washing machine will stop annoying you. If it’s new, all you need to do is remove the factory locks. The jumping device must be repositioned and the feet adjusted. In this situation, an anti-vibration mat may be helpful.
The washing machine makes a lot of noise when spinning. And there is nothing strange about it, but sometimes the situation is a bit complicated. It may happen that the device starts jumping around the bathroom unexpectedly. How to fix it? You have two options: you can level the washing machine or invest in an anti-vibration mat.
How to position the washing machine so that it does not run?
The device is equipped with feet that are designed to properly level the equipment. So place the washing machine on an even floor and start stabilizing the feet in such a way that the device does not wobble on the surface. In addition, you can stick halved balls under the washing machine. Wash the lower support with acetone, and the plates on which the equipment is located – with glass cleaner. Another way to prevent the washing machine from walking on the floor in the bathroom is to put a special anti-vibration mat under it.
Washing machine jumps on the floor? Know the reasons
If your recently purchased washing machine walks on the floor, the special locks installed by the manufacturer in the device have probably not been removed (or have been removed incorrectly). In each model, the location of the covers is slightly different, so you need to read the instructions on how to remove them.
When the washing machine is turned on with the protections not removed, and the appliance starts to rock rapidly, it can sometimes even be damaged. If the washing machine moves during the spin cycle, it may also be caused by insufficient load on the drum or, conversely, too much load. If you find that all of the above methods do not work and the equipment still “works”, it is very possible that the spring or shock absorber has been damaged.
Read also: The panels will be clean and shiny. Learn the genius trick of the cleaners
2023-06-09 18:42:36
#Washing #machine #jumps #spinning #trick #youre
