How to repair motorcycle battery cables. The following is a discussion of how to repair a damaged motor battery cable section. Make sure you listen to the discussion about this motorbike battery cable to the end.
The battery is a motorcycle component that has an important role. For those of you who don’t know, the battery acts as a source of electricity for several other components. One of the most important is to turn on the starter motor.
With it, we don’t need to use a kick starter to start the motor. Apart from the starter, the battery also plays a role in activating other motorcycle components. For example, horns, motorcycle lights, digital speedometers and so on.
Read Also: Motorcycle Dry Battery Can Be Charged or Not? Here’s the answer!
How to Fix Motorcycle Battery Cables that You Can Apply
The battery, of course, also has several other parts or components in it. One component that has a very important role is the battery cable. This cable has a function to deliver electric current from the battery to other components.
So, if there is no power cable then the electric current will not flow to other components. As a result, these components such as lights, starters and others cannot turn on. This is of course very inconvenient and also disturbing the owner of the motor.
So if you experience the problem above it could be that the problem is not with the battery. It could just be due to damage to the battery cable itself. So even though you have replaced the battery, the disturbance can still continue.
Therefore, to overcome this, you need a way to fix the motor battery cable. In this way, the motorcycle battery can return to its function properly. In the end, we can get the performance or performance of the motorbike as before.
The battery cable can indeed be damaged which affects the function of the battery. For example, the cable is peeled off due to the long time of use. This condition can trigger a problem, namely an electrical short circuit which is dangerous for the motor.
Besides that, the wrong battery cable installation can also have fatal consequences. For example, the installation error of the positive pole and the negative pole of the cable. It can also cause an electrical short and affect other components.
If the battery cable is completely damaged, then you have to replace it with a new one. The goal is that the electric current can be channeled to other components properly again. So, here’s how to fix a motorcycle battery cable by replacing it.
Read Also: Causes of Moldy Motorcycle Batteries and How to Clean Them
Off Lock Position
The first thing you have to do is to make the lock position off. Because if the key is still on then the electric current can still flow. Therefore you have to make sure that the lock position is off so it doesn’t cause a hazard.
Find Battery Position
Next, of course, you have to search and find the battery components first. Because this is the part that we will fix later. Usually the battery is located under the seat or on the right or left side of the motorbike body.
Remove the battery cable
After the battery position is found, you can immediately remove the motorbike battery cable. The battery has two terminals, positive and negative. Usually the positive cable has a red color while the negative cable is black.
How to fix the next motorbike battery cable, open the terminal using a plus or minus screwdriver. To release it also should not be arbitrary, but must be sequential. First you have to remove the negative pole cable after that just open the positive pole cable.
One thing you need to pay attention to is not to connect the positive and negative poles. Because it can cause a short circuit or electric spark. Therefore you have to be careful, don’t let the two get connected.
Read Also: Effects of a Batteryless Motor that Can Have a Bad Impact on Vehicles
Install the Battery Cable
If you also want to replace the battery, then you can replace it immediately. After that you can attach a good battery cable again. Just like how to remove it, there is a sequence that you must do.
First you have to attach the positive pole terminal and secure it using bolts. After that, attach the negative pole terminal and tighten it using a bolt. Make sure the bolts are properly and firmly installed to avoid problems.
That’s how to fix a motorcycle battery cable that you can apply. Be sure to install it carefully to avoid mistakes. (R10/HR-Online)
This post was last modified on Februari 8, 2023 7:31 PM
