Home » today » Business » 7 Signs Your Automatic Motorcycle Brake Pads Need to be Replaced: A Must-Know Guide

7 Signs Your Automatic Motorcycle Brake Pads Need to be Replaced: A Must-Know Guide



RADARBANYUMAS.DISWAY.ID – Signs that auto motorcycle brake lines need to be replaced are important things to pay attention to in order to maintain driving safety and comfort. Good and well-maintained brake pads help speed the vehicle efficiently and safely, thus reducing the risk of accidents.

Have you ever had a hard time while driving? It feels like your heart stops beating for a moment, when your automatic motorcycle doesn’t stop when the brake is pulled.

This experience happened to me several months ago, when I was in a hurry to the office. The weather was sunny in the morning but the streets were very busy, suddenly at an intersection a car ran a red light.

In a panic, I pulled the brake lever as hard as I could, but my automatic motorcycle would not stop. My heart was beating fast, cold sweat was soaking my hands.



READ IN:VERY COOL! Advanced Technology on Matic 2024 XMax 250 Motorcycle, Towards the Future of Premium Scooter

READ IN:5 Negative Effects of Using Improper Fuel on Auto Motorcycles, Threats to Engine Performance

Fortunately, at the last second, the car driver managed to brake and turn, so the accident was avoided. This incident made me realize that the brake pads on the automatic motorcycle were probably thin and needed to be replaced.

Brake pads are a vital part of automatic motorcycles, their job is to slow down or stop the vehicle. Brake lining wear that is not well maintained can be dangerous for drivers as it directly affects braking ability.

Therefore, it is important for auto motorcycle riders to know the signs that auto motorcycle brake lines need to be replaced. So you can replace the brake lines immediately, before the condition gets worse and endangers your safety when driving.

1. A grinding noise occurs when the brake is pressed

One of the most common signs of worn brake lines is the appearance of a grinding noise when the brake lever is pressed. This noise is caused by friction between the thin brake line and the brake disc, the sound that appears can be a squeak, squeak or squealing sound.

READ IN:NOTE! Disadvantages of installing a Brong exhaust on an automatic motorcycle, resulting in noise and air pollution

READ IN:Pay attention! 5 ways to keep the smart key system on a Honda motorcycle automatic

In addition to disturbing driving comfort, this braking sound is also an early warning of potential dangers. Immediately inspect and replace the brake lines, to prevent the risk of accidents.

2. The brake lever must be pulled deeper

When you have to pull the brake lever deeper than usual to get the same braking power, this indicates that the brake pads are running low. This happens because the brake line is thin, it cannot grip the brake disc better.

In other words, the braking ability of your automatic motorcycle is greatly reduced, this is definitely dangerous, especially when driving on busy, slippery or uphill roads. Ignore this sign and take your automatic motorcycle immediately to a repair shop to have the brake pads replaced.

3. Reduce braking power

Thin brake lines will have an immediate effect on reducing the braking power of an automatic motorcycle. This can be dangerous for drivers, especially when they have to stop suddenly or when crossing downhill roads.

READ IN:5 Smart Tips For Buying A Used Auto Motorcycle To Avoid Getting Cheated



READ IN:Rarely known! Here are 6 signs that a motorcycle’s V-Belt is about to come off

Poor braking power increases the risk of accidents. Ignore this sign and replace the brake lines immediately, to restore the braking performance of your automatic motorcycle to its original condition.

4. Brake fluid reduces faster

Brake fluid functions to transfer pressure from the brake lever to the brake lining. If the brake pads are thin, the brake fluid will leak more easily, so the volume will decrease faster than usual.

Check the brake fluid level periodically if the brake fluid decreases faster, and there are no signs of leaks in the braking system. So this could be a sign that the brake lines are worn, replace them immediately to avoid damage to other parts of the braking system.

5. Burning smell

Have you ever had a burning smell when braking? This burning smell can be a sign that the brake lines are worn, and need to be replaced immediately.

READ IN:7 factors that make automatic motorcycles more comfortable than conventional motorcycles

READ IN:Rarely known! 5 uses that often make automatic motorcycles go back and forth to the workshop

This smell is caused by excessive friction between the brake line and the brake disc. Excessive friction due to thin brake linings can cause excessive heat in the braking system.

If left unchecked, this can cause damage to other components, such as the brake disc. Ignore these signs and take your auto motorcycle to a repair shop immediately, to avoid more serious damage.

6. Brake Pad Wear Indicator

Some automatic motorcycles are equipped with a brake lining wear indicator, this indicator usually takes the form of a line on the brake line. If this indicator line is parallel to the surface of the brake line, this is an indication that the brake line needs to be replaced immediately.

The presence of this wear indicator makes it easier for riders to know when to replace brake lines, but not all automatic motorcycles have them. For automatic motorcycles that are not equipped with this indicator, it is important to recognize and pay attention to the other signs described previously.

7. Brake pads look thin

In addition to paying attention to the signs above, you can also directly check the position of the brake pads. If the brake pads look thin or worn, they need to be replaced immediately.

READ IN:Rarely known! 5 uses that often make automatic motorcycles go back and forth to the workshop

READ IN:Cleaning a rusty automatic motorcycle is not difficult, here are the steps

Generally, repair shops will check the thickness of the brake pads using special tools, but you can also check yourself. Make sure you know the minimum brake lining thickness limit, which is determined by your motorcycle manufacturer.

By recognizing the signs that automatic motorcycle brake lines need to be replaced, automatic motorcycle riders can ride safely and comfortably. Be sure to always prioritize safety, by ensuring that the braking performance of your automatic motorcycle is in good condition. (anchor)



Category:

2024-05-04 10:18:00
#Signs #Auto #Motorcycle #Brake #Pads #Replaced

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.