Good quality affordable Intel 12th generation cheap motherboard [BIOSTAR H610MH D4 이엠텍] : Dana and DPG DPG my heart

#Sponsored

Hello? Today I would like to introduce a motherboard for those who wish to use the 12th generation Intel CPU, but are concerned about the price burden of the motherboard. [BIOSTAR H610MH D4 이엠텍]Can not see it.

Currently, I want to use Intel’s 12th Generation, but I know there are a lot of people who choose Ryzen because of the price of the motherboard. Especially for the game [인텔 i3-12100이나 i5-12400]For those who choose, the price of the motherboard is inevitable. In terms of price, the H610 board can be bought for less than 100,000 won, but considering the specs used for the H610 motherboards, there are many cases where you choose the B660 motherboard instead of the H610. If you choose the B660 motherboard, you have to spend about 50,000 won more in terms of price, so it will be a difficult decision for users who choose the economy. However, there are mentally burdened people choosing Ryzen and there are cases where they have to choose Intel. long last [인텔 12세대 H610메인보드]There is a motherboard that reduces the price burden and meets the performance and specification by selecting. that’s the [BIOSTAR H610MH D4 이엠텍]Can not see it.

Let’s take a quick look at the motherboard specs.

model: BIOSTAR H610MH D4 EMTECH

socket: Intel 12th generation 1700

Chipset: Intel H610

memory: DDR4-3200Mhz 2 slots Max 64GB

Interface: PCIe 4.0 x 16

usb: 3.0 2 x 2.0 4

Power supply: 8 + 1 + 1 phases

Overall, it’s an H610 motherboard, so it’s not a good spec. Although it is an m-ATX, it only supports two memory slots and the rear USB 3.0 is not enough. But it’s the H610 motherboard. [PCIe 4.0]is supported, and the most characteristic part is that the power part is 10 phases (8 + 1 + 1). In general, H610 motherboards often have poor power supply. The minimum is 5 stages and the maximum is 8 stages. However, the BIOSTAR H610MH motherboard has a comparable power supply to the B660 motherboard.

This is a photo of the box.

It has a clean design in black.

The components are in the box.

We provide 2 SATA cables, IO shield, manuals and CD-ROM which are not often supplied these days.

This is a photo of the motherboard.

It is a simple but simple design. There are a total of 10 gray color power units, which are self powered for 10 phases. If you look closely at the bottom, there are 4 LEDs to the left of the SATA port. This is an LED that indicates the status of the motherboard, usually found on high-end cards. [CPU, DRAM, VGA, BOOT] It shows a total of 4 states. While it is an inexpensive H610 board, it is a main board that exhibits unexpected functions, including power and status LEDs.

This is an image of the side of the rear I / O shield.

From left, D-sub terminal, HDMI terminal, 2 USB ports, PS2 keyboard terminal, 2 USB 3.2 terminals, RJ45 terminal, 2 USB ports and audio terminal. It is a simple composition. Too bad there are only two USB 3.2’s. I think it would have been really cool if there were two USB 2.0s and four 3.2s.

This is the terminal on the back of the motherboard.

It is an orderly composition. You can see that all the welds are in good condition.

The system prepared for this review is as follows.

CPU: Intel I5-12400F

M / B: BIOSTAR H610MH D4 EMTECH

Ram: Corsair DDR4 3600Mhz 8GB * 2 = 16GB

VGA: MSI Radeon RX6600 MECH 2X D6 8GB

Cooler: JONSBO CR-1000 AUTO RGB

power: Zalman Megamax 500W

case: Zalman N4 CTRL

This is the motherboard socket.

I’ll put I5-12400F here.

The 12th Gen 1700 socket is already rumored to be rectangular, so it looks like the CPU is floating slightly. Also, the stiffness of the grip is stronger than that of the existing grip, so it seems to be more like that.

in that socket [인텔 I5-12400F]and apply the thermal paste.

The thermal was set up normally. hehe

[BIOSTAR H610MH D4 이엠텍]I tested the LED function, which is a feature of.

The LED lights up in the part where the problem occurs as the part goes back and forth.

I plugged in the CPU, installed the cooler, and first settled on the motherboard.

The unique setup is that the 8 pin motherboard is usually placed at an angle parallel to the edge of the motherboard … This guy is placed at a right angle. If the cooler is large, it will be difficult to install that part. [잘만 CNPS10X PERFORMA BLACK] instead of cooler [존스보 CR-1000 AUTO RGB]has been replaced with

After installing the graphics card, I performed a test boot.

The PC was able to boot normally with no problems.

After installing all the systems and completing the complete assembly, I took a picture.

As for the motherboard BIOS, it was not easy to find a configuration because it was the first time I saw BIOSTAR. I also set the memory to XMP and installed Windows 10 normally.

However, it’s a bit disappointing that the (almost newer) version of Windows 10 couldn’t find the network drive. It was a shame not being able to find the LAN driver even though the Windows 10 installation file was burned to the latest version 2 months ago. Finally I connected the CD-ROM and installed the driver.

I checked with cpu-z.

The BIOS is updated as of March 25, 2022. However, when I checked the memory contents, it was strangely not 3600 Mhz even though I had selected the XMP 2.0 profile. [3200Mhz(Dram Frequency가 1596Mhz의 2배가 원래주파수)로 인식] was Consequently, the CL latency value is tighter, but the clock itself is not the original XMP value. Is it because the maximum clock value of the motherboard is 3200Mhz? However, last time AMD’s A320 motherboard was also 3200Mhz in its spec, but it was recognized as 3600Mhz.

First, I ran a simple CPU-z benchmark. The number is the same as the number I have compared with other motherboards and the error range is the same.

I ran the benchmark with Cinebench R23.

The multi-benchmark score is 11183. The original score was about 12000 points, but it was about 1000 points lower than the original score. I thought the score was a little low so I compared it several times and it was the same. If you look closely, you can see that the all-core clock starts at 4.0Ghz and then drops without being able to maintain 4Ghz while on the bench. Fortunately, the single score showed a normal value with almost an error range. It appears that the power part is 10-phase, but it seems that the power part cannot be maintained.

I compared the game.

– Assassin’s Creed Odyssey (high): 87fps average frame rate

– Division 2 (good): average frame rate 94 fps

– Forza Horizon 4 (very high): average frame rate 133 fps

Overall, as a gaming benchmark, I compared my existing motherboard. [인텔 I5-12400F]and there wasn’t a big difference. It seems to give you the performance you need. the main board [BIOSTAR H610MH D4 이엠텍]Using it as an I5-12400F, it seems to get enough performance. The cinebench score is disappointing, but we have confirmed that there are no issues with playing.

If you look at the price of PC components these days, when a new generation comes out, the price goes down … Oddly, the price goes up unexpectedly. In particular, there is a phenomenon whereby the price of Intel’s CPU and motherboard goes up. The Intel I5-12400F that I am using has also increased by over 20,000 won and the motherboard I am using has also increased by 10,000 to 20,000 won. In this situation, when you choose 12th Gen Intel, you have no choice but to worry about the price of the motherboard. in such a situation [BIOSTAR H610MH D4 이엠텍]can use 12th generation Intel at a reasonable price. Of course, i7 class or above is difficult, but i5 class can be seen as a motherboard that can be used enough. Here is a brief summary of the pros and cons of this motherboard:

– EM-Tech’s free 3-year customer support you can trust

– Economical Biostar motherboard for 12th generation Intel

– Biostar can be used with confidence with increased durability and stability!

EM-Tech has released a good value for money motherboard that costs less than 100,000 won for the H610 chipset. That said, it also supports free A / S for 3 years. Customer Service EM-Tech High Satisfaction Match and Cost-effectiveness I don’t think there is anything more satisfying for customers than this. Bottom line, if you are setting up 12th Gen Intel budget products, be sure to check out this product and this will be the end of the review. thank you