Bond 875 Flaws and Equip GT Reviewed: Two Microcars Compared
Bond 875 production suffered from severe structural shortcomings from its launch on the market between 1965 and 1970 in British specification, as reported on Yahoo!ニュース.
Designers trimmed vehicle weight to the extreme, resulting in body fiberglass panels that were overly thin and reinforcing frames that were omitted entirely, leaving the structure with inadequate overall strength. The Hillman Imp engine crammed into the narrow engine bay proved highly prone to overheating.
Enthusiasts like Dennis Jump stepped in afterward to tackle these inherent factory defects and update the microcars to a proper operating standard. Jump’s vehicle is an Mk2 model built between 1968 and 1970, which is distinguished from the earlier Mk1 by its rectangular headlights on the front fascia.
Interior Packaging and Road Dynamics of the Mk2
The cabin feels remarkably sparse compared to larger automobiles, featuring seats covered in thin padding and a thin-rimmed, large-diameter steering wheel supported by three delicate spokes. A large speedometer from the Imp dominates the dashboard, supplemented by a central cluster of three auxiliary gauges that were added later as aftermarket equipment.

Driving the 875 feels surprisingly similar to piloting a conventional automobile, allowing the rev-happy four-year-old engine to be pushed without hesitation. The car accelerates smoothly past 110 km/h, delivering an unexpectedly energetic punch on the road.
Steering feedback remains uncomfortably heavy and lacks direct response, requiring constant minor corrections even when cruising alongside regular traffic flow.
Transition to the Bond Equip GT 2+2
Shifting from the 875 to a 1964 Bond Equip owned by Jeff Baker reveals a distinctly sporty four-wheel coupe that Bond Cars introduced in 1963 to expand its lineup, according to AUTOCAR JAPAN. The underlying engineering borrows heavily from the contemporary Triumph Herald, retaining its backbone chassis, independent suspension, and front disc brakes.
The two-door fastback styling originated from Lawrence Bond, though the floorpan, bulkhead, and windshield were sourced directly from the Herald. Power comes from a 1147cc inline-four engine borrowed from the Triumph Spitfire, equipped with twin carburetors to generate 64 horsepower.
Baker’s early-production model showcases the most aesthetically pleasing fiberglass bodywork among the evaluated vehicles, featuring a six-lens taillight arrangement and a graceful roofline flowing into the rear deck. The interior features well-cushioned semi-bucket seats alongside Triumph Spitfire gauges framed by teak wood trim.
| Bond Model | Production Years | Key Engine Source | Notable Design Feature |
|---|---|---|---|
| Bond 875 Mk2 | 1968–1970 | Hillman Imp | Rectangular headlights and sparse cabin |
| Bond Equip GT 2+2 | 1963–1964 | Triumph Spitfire 1147cc | Six-lens taillights and fastback styling |
Subsequent iterations evolved into the more potent Equip GT 4S and the larger 2.0-liter GT powered by a Triumph unit.
Before adopting its later moniker, Bond Cars originated as a British car maker founded in 1922 by Paul Sharp. The enterprise initially made its mark with economical three-wheeled vehicles featuring single-cylinder two-stroke engines, which gained widespread popularity during post-war economies. Because these early machines lacked a reverse gear, their unique front-wheel assembly could be rotated up to 90 degrees to let the vehicle turn completely within its own length.
Rear passenger accommodation remains strictly limited to children, and with no tailgate access, the rear area functions primarily as a luggage bay.