BepiColombo X-ray Telescope Captures First Images to Calibrate Sensors
The BepiColombo mission’s X-ray telescope has captured its first images from space, confirming the instrument is ready to analyze the surface of Mercury.
After an eight-year journey spanning approximately 10 billion kilometers, the Mercury Imaging X-ray Spectrometer (MIXS) successfully observed the Crab Nebula to calibrate its sensors, according to the University of Leicester.
The test results showed that the instrument is performing slightly better than it did during laboratory trials conducted in 2015 before the mission’s 2018 launch, infobae reported. Scientists directed the telescope toward the nebula, a remnant of a star explosion located 6,500 light-years away, to use its consistent X-ray emissions as a reference point for checking system functionality.
“We have waited a long time to take measurements with MIXS and it is fantastic to see it working so well in space,” said Emma Bunce, principal investigator for the instrument and director of the Space Research Centre at the University of Leicester, according to infobae.
The calibration process involved the spacecraft performing 55 movements between September 11 and September 12, gathering data over a 39-hour period, according to infobae. The team identified cosmic rays hitting the sensors during the observation but confirmed these high-energy particles can be filtered out from final datasets.
The telescope’s ability to view the cosmos was restricted for most of the mission while the spacecraft remained attached to its propulsion module.
This structure separated on September 3, 2026, finally clearing the field of view for the onboard instruments, Gizmodo en Español reported.
The BepiColombo mission, a joint project between the European Space Agency and the Japan Aerospace Exploration Agency, is scheduled to attempt its orbital insertion around Mercury on Saturday.
Following this maneuver, the mission will separate its two scientific orbiters—the Mercury Planetary Orbiter and the Mio magnetospheric orbiter—between December 9 and December 10, 2026. Scientific operations are set to begin in April 2027.